Shop / audiocontrol audiocontrollc7i
ACR3 Remote for Audio Control Processors
Add to wishlist
Category: audiocontrol audiocontrollc7i

About this item
- Compatible with: LC8i 8-channel line converter, DQ-61 factory sound processor, DQDX digital signal processor, D-4.800 4-channel amp and DSP, D-6.1200 6-channel amp and DSP, DM-608, DM81 digital signal processors, & The Epicenter Amplifiers.
- This wired remote (ACR-3) enables seamless switching between input sources, volume control for the auxiliary input, and modification of the output level for channel 4 (typically designated for a subwoofer) on the AudiControl LC8i. It is intended for dash mounting, allowing for convenient access by the driver; installation can be done beneath the dash using the provided bracket, or the bracket can be omitted to allow for custom installation of the knob and LED through the dash. Activating the knob engages the auxiliary input.
- Bracket Installation: The dash control mounts with two screws, which attach to the underside of the dashboard. Slide under the dash and place the dash control in its mounting position, mark the two mounting holes, drill pilot holes, and secure with two screws.
- Custom Installation: For that custom, finished look, the dash control can be flush mounted directly on the dash-board (or anywhere else). Disassemble the dash control from the mounting bracket. Start by pushing the LED from its holder followed by removing the circuit board and rotary control from the bracket. Drill a 9/32" hole in the dashboard for the control along with a 1/8" hole for the lock tab and a 13/54" hold for the LED holder. Reassemble the dash control components on the dashboard.
- Mounting Options: The dash control may be mounted under the dash using its own bracket or through a custom hold in the dash. It should be within reach of the driver and in a spot where the LED is plainly visible


